Stenner #7 Pump Tube - Santoprene - Package of 2 inlet-pipe-size_4" Measure the alkalinity in the

Measure the alkalinity in the water again after 4 hours and make any final additions

Severe shock loads and stress are absorbed by the valve body

Important Note: Speck pumps must be installed by a qualified technician to ensure your warranty is not voided

no need for pumping

90 inches for the rail tubing and the distance between the front (pool) rail and back (anchor) rail is 60 inches

Stenner #7 Pump Tube - Santoprene - Package of 2 inlet-pipe-size_4" Measure the alkalinity in theThis is a package of 2 #7 Stenner Santoprene replacement chemical pump tube assemblies. Two replacement tubes and standard 1 4 inch ferrules are included with this item. This tube is compatible with Stenner 45, 85, S30, S34, S3F, and S3V pumps. The first time the pump tube is replaced is a fair indication of the approximate life of the tube in that particular application. Be sure to verify that the tube replacement was due to wear and not an outside