0.100" (2.54 mm) Female Header: 1x9-Pin, Straight (10-Pack) hub-sensoren Uses Atmel's 2x5 pin JTAG

Uses Atmel's 2x5 pin JTAG connector layout (DIFFERENT FROM ICSP CONNECTOR layout

allowing the use of different gender connectors or wires to be soldered directly to the pads for lighter

The short ends of the extended 2×12 male header strip should be soldered to the board as shown above (with the solder joints made on the component side of the array)

HRLV-MaxSonar-EZ4

Minimum operating voltage: 6 V

0.100" (2.54 mm) Female Header: 1x9-Pin, Straight (10-Pack) hub-sensoren Uses Atmel's 2x5 pin JTAGThese 0. 1" straight female header strips are commonly used as low cost connectors for custom made cables or perforated prototyping PCBs. The standard spacing is the same as on most solderless breadboards and matches 0. 1" male header strips. Note: these headers ship in packs of 10 Dimensions: Pins: 1 x 9 Spacing: 2. 54 mm General specifications: Gender: female Pin type: straight Current rating: 3A